Tone Dialing Switch Over
If your telephone company uses pulse dialing, you can switch over to tone dialing after the call connects. This feature is useful when you need tone dialing to use any automated menu systems, such as telephone bank tellers, telephone prescription refills, customer support menus, etc.
If your phone is set to pulse dialing mode, make your call
normally. Once your call connects, press the */tone key. Any digits you enter from then on will be sent as tone digits. When this particular call ends, the phone automatically returns to pulse dialing mode.
Privacy Mode
Privacy mode prevents interruption from other registered handsets or the base. This works only when the phone is in use. While on a call, press the OPTIONS soft key on the handset or base. Use the up/down key to select Call Privacy. Privacy Mode On appears in the display. To exit Privacy Mode, use the same procedure. Privacy Mode Off appears.
Find Handset
6CNM
2TKXCE[/QFG1P
126+105 
/1$+.'
Using
To locate the handset, press end/find hs on the base when the phone is in standby mode. Select the handset to page. The handset beep for 60 seconds, and Paging appears on the handset display. To cancel paging, press any key on the handset or end/ find hs on the base.
w w w . u n i d e n . c o m | Using Your Phone [ 6 0 ] |
Your Phone