Uniden important safety instructions DX834/DXC834

Page 9

2.Plug the AC Adapter into the Base Unit.

3.Place the AC Adapter cord inside the molded channel.

4.Plug one end of the long telephone cord into the TEL LINE jack on the Base Unit.

5.Place the cord inside the molded channel on the bottom of the Base Unit.

6.Place the Base Unit on the screws and push down until it’s firmly seated.

7.Plug the other end of the telephone line cord into the wall jack.

8.Plug the AC Adapter into a standard 120V AC wall outlet. Note: Do not use an outlet controlled by a wall switch.

DX834/DXC834

9

Image 9

Contents Contents DX834/DXC834 Important Safety InstructionsBattery Safety Precautions Features IntroductionIncluded with the DX834/DXC834 Phone Important Electrical Considerations Connecting the Telephone Cords InstallationApplying Power to the Base Unit Selecting a LocationDesk or Tabletop Installation Wall Installation Direct Wall MountingStandard Wall Plate Mounting DX834/DXC834 Setting the Handset Retainer Setting Up Your Phone Installing the Handset Battery PackExtending the Antenna Charging the Battery Pack Cleaning the Battery ContactsInitial Battery Charging Charging from the Charging CradleTo Avoid this Memory Effect Battery Memory EffectSetting the Pulse/Tone Switch Low Battery IndicatorAdjusting Ringer Controls Adjusting Handset Receiver VolumeUsing Your Phone Making and Receiving CallsChanging Channels, Flash, and Page/Find This Page Intentionally Blank Storing a Number in Memory Programming Your PhoneStoring a Mixed Number P3300Chain Dialing Dialing a Stored NumberErasing a Stored Number Troubleshooting Specifications Base UnitHandset Addendum to Specifications Precautions Controls and Functions Base Controls and Functions Handset One-Year Limited Warranty Covered under one or more of the following U.S Patents