Uniden XCA550/55 important safety instructions Using Your Phone, Making and Receiving Calls

Using Your Phone

Making and Receiving Calls

The following features of the XCA550/55 phones are different depending on the Handset’s location when you make or receive a call.

		Handset On		Handset Off
		Base		Base
Answer	Pick up Handset.		Press T.
Call	(AutoTalk)
Make Call	1) Pick up		1)	Press T.
		Handset.	2)	Listen for dial
	2)	Press T.		tone.
	3)	Listen for dial	3)	Dial the
		tone.		number.
	4)	Dial the
		number.
Hang up	Return Handset		Press T.
	to Base.
	(AutoStandby)
Redial	1) Pick up		1)	Press T.
		Handset.	2)	Listen for dial
	2)	Press T.		tone.
	3)	Listen for dial	3)	Press F.
		tone.
	4)	Press F.

Note: Sometimes when you press Tto hang up the phone, you may get an error tone and the phone will not disconnect. If this happens, place the Handset on the Base Unit or press Tagain while holding the Handset close to the Base Unit.

Changing Channels, Flash, and Page/Find

To change channels or access call waiting while the phone is in use, or to use the one-way page to locate the Handset, follow these steps:

	Press These	You Will Hear
	Keys
Changing	Press C.	A click similar
Channels	Note: Change	to when Fis
	channels to	pressed. There
	help eliminate	may be a brief
	background	pause as your
	noise.	phone
		searches for a
		clear channel.
Flash	If the call	A click, a short
	waiting tone	pause, then the
	sounds, press	caller (if you
	Fto accept	were on a call).
	the waiting call
	— OR —	— OR —
	If you have	A click, and
	finished a call	then a dial tone
	and want to	so you can
	make another	make a
	call, press F	different call.
	to hang up and
	get a dial tone.
Page/Find	Press page/find	The Handset
	on the Base	will beep more
	Unit to locate	than 5 times.
	the Handset

18 XCA550/55