Uniden XCA550/55 Dialing a Stored Number, Chain Dialing, Erasing a Stored Number

Dialing a Stored Number

To dial a number previously stored in memory, follow these steps:

1. Remove the

Handset from the

Base Unit.

2.Press T.

3.Press M.

4.Press the memory location number (0-9).

Chain Dialing

On certain occasions, after dialing a number, you may be requested by the party or service you are calling to enter a special access code, such as when performing a banking transaction. To do this, simply:

1.Store the access code into one of the memory numbers.

2.Dial the main number.

3.At the appropriate time, press Mfollowed by the memory location number where the access code is saved.

Erasing a Stored Number

To erase a number previously stored in a memory location (0-9), follow these steps:

1. Remove the

Handset from the

Base Unit.

2.Press Mtwice.

3.Press the memory location number (0-9).

Note: An error tone will sound and the erase procedure will be canceled if more than 20 seconds elapse between each keystroke entry or step.

20 XCA550/55