Uniden EXV 990 Erasing a Stored Number, Dialing a Stored Number, Remove the handset from the base

Color profile: Disabled Composite Default screen

When the voice prompt says “Replace memory [location number]. Say yes or no,” if you don’t say anything within 3 seconds, you will hear “closer please.” If you still don’t respond, the handset beeps and the programming procedure cancels.

When you are ready to talk on the phone, press speaker to hear through the handset earpiece.

C:\Exv990\exv990 1 of 2.vp Wed Sep 09 09:09:52 1998

ERASING A STORED NUMBER

1) Remove the handset from the base.

2) Press store. The talk LED blinks and, in speaker mode, the speaker LED lights.

You will hear:

3)Enter the 2-digit memory location number that you want to erase. For example enter 0 then 1.

You will hear:

4)Say “Yes.”

5)Press store. This erases the memory location

DIALING A STORED NUMBER

1) To dial a number from the handset, remove the handset from the base. Press voice.

To dial a number from the base, press VoiceDial.

2)You will hear:

For example, if you have programmed John Smith in location 01 at 555-555, you say “John Smith.”

Or, you can enter the two-digit memory location where John Smith’s number is stored. For example: enter 0 then 1.

You will hear:

3)The number will automatically dial.

15

V O I C E D I A L P R O G R A M M I N G