Uniden EXV 990 manual Charging the Battery Pack, T T I N G U P, Initial battery charging

Page 7

Color profile: Disabled Composite Default screen

Use ONLY the Uniden AC adapter supplied with this phone.

Before using your phone, fully charge the rechargeable Nickel- Cadmium battery pack. We recommend that the battery pack charge for 15-20 hours without interruption before plugging the phone line into your new phone.

The battery discharges more quickly with use. For optimum charge, return the handset to the base after using.

CHARGING THE BATTERY PACK

▼Initial battery charging

Before using your phone for the first time, fully charge the rechargeable Nickel-Cadmium battery pack. We recommend that the battery pack charge for approximately 15-20 hours, without interruption, before plugging the phone line into your new phone.

1) Place the handset in the base.

2) Make sure the status LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.

▼Low battery indicator

When the battery pack is very low and needs to be charged, the phone is programmed to eliminate functions to save power.

If the phone is not in use, the talk LED flashes every 3 seconds, and none of the buttons will operate. If you are using the phone, the handset beeps and the talk LED flashes every 3 seconds.

Complete your conversation as quickly as possible. Return the handset to the base for recharging.

S E T T I N G U P

5

C:\Exv990\exv990 1 of 2.vp

Wed Sep 09 09:09:31 1998

Image 7

Contents Page Contents Welcome EXV 990 FeaturesT R O D U C T I O N Included in Your Package TIPPlug the AC adapter into a standard 120 VAC wall outlet InstallationCharge the battery refer to Charging the Battery Pack, Back of the baseTo connect the battery Connecting the Handset Battery PackRaise the base antenna to the vertical position T T I N G U P Charging the Battery PackInitial battery charging Low battery indicatorHandset earpiece volume Setting the PULSE/TONE SwitchAdjusting Ringer Controls Handset ringer tone and volumeTo change the digital code Automatic Digital Code SecurityTo one of the more than 65,535 codes PAGE/FIND Cleaning Battery ContactsA N D a R D U S E Standard calls without using the memory featuresUsing the memory features Making & Receiving CallsHandset Speaker Phone Chain DialingChanging Channels Flash & Call WaitingBase I C E D I a LHandset in base Base speaker volumeBase Speaker Phone Handset removed from baseThen press store Storing a Phone Number in MemoryI C E D I a L P R O G R a M M I N G Then you will hearStoring a Mixed Mode Number You will hear Number will automatically dial Erasing a Stored NumberDialing a Stored Number Remove the handset from the basePress . You will hear Reviewing Numbers in MemoryTo turn the dialing announcement on Monitor ModeDial Announce ON/OFF To turn the dialing announcement offVoice Memory Entry Tips Resetting improperly FeaturesTurning the Answering System ON/OFF Hour is announced Setting the ClockDay is announced Is announced Press clock again to select the dayMinute is announced T T I N G U P I T a DPM or AM is announced Preset messages Setting Your Outgoing Message OGMRecording your personal OGM Selecting Message Time Announce only featureMemo Selecting a PIN Code Calling Party Control FeatureLED displays After two or four rings. In the TS Setting the Toll Saver SwitchUsing the Reset Button Ring time/toll saver switchAfter you have reviewed your Playing Your MessagesSystem I N G a N S W E RSkipping a Message Then press and hold delete for 2 seconds Deleting MessagesRecording a Conversation Review your messagesFunction Press Remote Access Away from HomeO B L E M G G E S T I O N TroubleshootingHandset doesn’t ring or EXV 990 complies with FCC Parts 15 N E R a LS E N D S E T\Exv990\exv990 part 2 of 2.vp Wed Sep 09 085818