Color profile: Disabled Composite Default screen
If the base loses power while the handset is off the base, the digital code may be erased. If this happens, the handset won’t function. Put the handset on the base to reset the digital code.
AUTOMATIC DIGITAL CODE SECURITY
To avoid unauthorized calls on your phone, a digital code was added to the EXV 990 phone. The handset and base share this digital code. The number is selected randomly the first time you use the phone.
▼ To change the digital code:
1)Place the handset on the base.
2)Press page/find on the
base. The handset will beep for about 6 seconds.
3)Remove the handset from the base until the beeping stops.
Return the handset to the base.
The status LED flickers momentarily to indicate that the digital security code is set
to one of the more than 65,535 codes.
▼To reestablish communication between the handset and base:
1)Restore power to the base.
2) Place the handset on the base.
The status LED flickers
momentarily to indicate that 
the digital security code is set. 
S E T T I N G U P
7
C:\Exv990\exv990 1 of 2.vp
Wed Sep 09 09:09:34 1998