Uniden EXLI 8962 owner manual Paging, To locate the handset, Press any key on the handset to end

Page 30

Paging

To locate the handset

When it is not on the base.

1 Press and hold page/find on the

base for more than 2 seconds.

2 The handset beeps for 60 seconds. The following screen appears;

Paging

3 Press any key on the handset to end.

Notes
• If you press and hold page/find	for less than a second, the handset only beeps for
5 seconds. If you press and hold	page/find for longer than 60 seconds, the

handset beeps for the same of time that you press and hold it for.

•When an incoming call is received during paging, paging is stopped and the telephone is switched to the incoming call.

• If you press the talk key during a page, the handset will be placed in off-hook (talk) mode.

• Paging cannot be performed while the handset is in use.

Image 30

Contents Exli Features IntroductionTable of contents 6 to Next, choose the best location to set up the base unitRead this first 9 to10Checking the package contents StepSetting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode ToneTONE PulsePULSEPreparing the battery pack This position lets you see Caller ID messages on the displayBattery use time per charge When the battery charge becomes lowCleaning the battery contacts Entering your area code Making calls On-hook dialingPress talk . Talk flashes on the display Off-hook dialing Mute featureThen the volume setting is displayed Dial the phone numberRedialing On-hook redialingLast three phone numbers dialed can be quickly redialed Off-hook redialing Press talk Talk appears flashing on the displayMute when ringing Auto Talk when ringingAny key when ringing Any key when pagingRinger switch Ear Speaker volumeRinger tone Memory storing Storing phone numbers and namesPress and hold mem until Memory Store is displayed Number is displayed. The cursor Redial/p keys to enter the phone numberAfter about 2 seconds, Memory Store is displayed Memory dialing Making calls with memory dialingOn-hook dialing Off-hook dialing Display a Programmed NumberMemory editing Editing Stored name and/or phone numberPress mem to exit edit mode After about 2 seconds, MemoryDisplayed Memory erasing Erasing a stored name and phone numberOn-hook dial editing Deleting a phone numberOff-hook mute MuteLDM Long Distance Manager Bell in muteLongDst appears and remains on LDM On-hook dialingLongDst flashes on the display Do not useOff-hook redialing LDM Off-hook dialingOff-hook dialing Off-hook memory dialingLDM Private Branch Exchange PBX dialing Paging To locate the handsetPress any key on the handset to end Caller ID Caller ID serviceSetting Caller ID options Press ¥or »to move the cursor to the item that is to be setWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listPress del Deleting information from the Caller ID listDeleting a Caller ID message Press ¥or »to select Yes orDeleting all Caller ID name/numbers Display returns to the summary screenLong Distance calls Using the Caller ID listCalling a party from the Caller ID list Select the phone number that you want to dial. SeeIf a message has already been stored in the select Storing Caller ID messages in Memory dialingPress mem Ed memory numbers location, a verification screenUsing Caller ID with call waiting service Additional information Changing the digital security codeMounting the base unit on a wall Standard wall plate mountingRetainer out of the slot. Rotate it clock Direct wall plate mountingOn the base unit, pull the handset Wise 180 degreesInstalling the beltclip Headset installationTo attach the beltclip To remove the beltclip Power Failure MaintenanceBattery replacement and handling Wipe with a soft, dry clothTroubleshooting To help eliminate backgroundBase unit SpecificationsGeneral HandsetIndex W, X, Y, ZAdditional Information Uniden America Corporation