Uniden EXLI 8962 Direct wall plate mounting, On the base unit, pull the handset, Wise 180 degrees

Page 41

Additional information

Handset retainar	7 On the base unit, pull the handset
	retainer out of the slot. Rotate it clock-
	wise 180 degrees.

8 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place,

[Direct wall plate mounting]

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location. That could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP

3/16 in.

3-15/16 in.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 8 on page 39 to mount the telephone.

Additional Information

41

Image 41

Contents Exli Introduction FeaturesTable of contents Read this first Next, choose the best location to set up the base unit6 to 9 to10Step Checking the package contentsChoose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeToneTONE PulsePULSE Choose the dialing modeThis position lets you see Caller ID messages on the display Preparing the battery packCleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Entering your area code Press talk . Talk flashes on the display Making callsOn-hook dialing Then the volume setting is displayed Mute featureOff-hook dialing Dial the phone numberLast three phone numbers dialed can be quickly redialed RedialingOn-hook redialing Press talk Talk appears flashing on the display Off-hook redialingAny key when ringing Auto Talk when ringingMute when ringing Any key when pagingRinger tone Ringer switchEar Speaker volume Press and hold mem until Memory Store is displayed Memory storingStoring phone numbers and names After about 2 seconds, Memory Store is displayed Number is displayed. The cursorRedial/p keys to enter the phone number On-hook dialing Memory dialingMaking calls with memory dialing Display a Programmed Number Off-hook dialingEditing Stored name and/or phone number Memory editingDisplayed Press mem to exit edit modeAfter about 2 seconds, Memory Erasing a stored name and phone number Memory erasingDeleting a phone number On-hook dial editingLDM Long Distance Manager MuteOff-hook mute Bell in muteLongDst flashes on the display LDM On-hook dialingLongDst appears and remains on Do not useOff-hook dialing LDM Off-hook dialingOff-hook redialing Off-hook memory dialingLDM Private Branch Exchange PBX dialing Press any key on the handset to end PagingTo locate the handset Setting Caller ID options Caller ID serviceCaller ID Press ¥or »to move the cursor to the item that is to be setHere are some typical displays When the telephone ringsViewing the Caller ID Message list Long Distance call settings and cancellationDeleting a Caller ID message Deleting information from the Caller ID listPress del Press ¥or »to select Yes orDisplay returns to the summary screen Deleting all Caller ID name/numbersCalling a party from the Caller ID list Using the Caller ID listLong Distance calls Select the phone number that you want to dial. SeePress mem Storing Caller ID messages in Memory dialingIf a message has already been stored in the select Ed memory numbers location, a verification screenUsing Caller ID with call waiting service Changing the digital security code Additional informationStandard wall plate mounting Mounting the base unit on a wallOn the base unit, pull the handset Direct wall plate mountingRetainer out of the slot. Rotate it clock Wise 180 degreesTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Battery replacement and handling MaintenancePower Failure Wipe with a soft, dry clothTo help eliminate background TroubleshootingGeneral SpecificationsBase unit HandsetW, X, Y, Z IndexAdditional Information Uniden America Corporation