Uniden EXLI 8962 owner manual Choose the dialing mode, ToneTONE PulsePULSE

Page 8

Step 2 (continued)

Notes

•Use only the supplied AD-420 AC adapter. Do not use any other AC adapter.

•Connect the AC adapter to a continuous power supply.

•Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.

Tips

•If your telephone outlet isn't modular, contact your telephone company for assistance.

Polarity of the plug

Modular

Choose the dialing mode

PULSE TONE

Depending on your dialing system, set the TONE/PULSE switch as follows:

If your dialing system is Set the switch to

ToneTONE

PulsePULSE

If you aren't sure of your dialing system

Make a trial call with the TONE/PULSE switch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

Image 8

Contents Exli Features IntroductionTable of contents Next, choose the best location to set up the base unit Read this first6 to 9 to10Checking the package contents StepSetting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode ToneTONE PulsePULSEPreparing the battery pack This position lets you see Caller ID messages on the displayCleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Entering your area code Press talk . Talk flashes on the display Making callsOn-hook dialing Mute feature Then the volume setting is displayedOff-hook dialing Dial the phone numberLast three phone numbers dialed can be quickly redialed RedialingOn-hook redialing Off-hook redialing Press talk Talk appears flashing on the displayAuto Talk when ringing Any key when ringingMute when ringing Any key when pagingRinger tone Ringer switchEar Speaker volume Press and hold mem until Memory Store is displayed Memory storingStoring phone numbers and names After about 2 seconds, Memory Store is displayed Number is displayed. The cursorRedial/p keys to enter the phone number On-hook dialing Memory dialingMaking calls with memory dialing Off-hook dialing Display a Programmed NumberMemory editing Editing Stored name and/or phone numberDisplayed Press mem to exit edit modeAfter about 2 seconds, Memory Memory erasing Erasing a stored name and phone numberOn-hook dial editing Deleting a phone numberMute LDM Long Distance ManagerOff-hook mute Bell in muteLDM On-hook dialing LongDst flashes on the displayLongDst appears and remains on Do not useLDM Off-hook dialing Off-hook dialingOff-hook redialing Off-hook memory dialingLDM Private Branch Exchange PBX dialing Press any key on the handset to end PagingTo locate the handset Caller ID service Setting Caller ID optionsCaller ID Press ¥or »to move the cursor to the item that is to be setWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messagePress del Press ¥or »to select Yes orDeleting all Caller ID name/numbers Display returns to the summary screenUsing the Caller ID list Calling a party from the Caller ID listLong Distance calls Select the phone number that you want to dial. SeeStoring Caller ID messages in Memory dialing Press memIf a message has already been stored in the select Ed memory numbers location, a verification screenUsing Caller ID with call waiting service Additional information Changing the digital security codeMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting On the base unit, pull the handsetRetainer out of the slot. Rotate it clock Wise 180 degreesTo attach the beltclip To remove the beltclip Installing the beltclipHeadset installation Maintenance Battery replacement and handlingPower Failure Wipe with a soft, dry clothTroubleshooting To help eliminate backgroundSpecifications GeneralBase unit HandsetIndex W, X, Y, ZAdditional Information Uniden America Corporation