Uniden EXLI 8962 owner manual Maintenance, Battery replacement and handling, Power Failure

Page 43

Additional information

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

RECYCLING NICKEL-CADMIUM BATTERIES

NICKEL-CADMIUM

BATTERIES MUST BE

DISPOSED OF

PROPERLY.

Ni-Cd

Nickel-cadmium cells are used in the bat- tery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel-cadmium batteries.

Power Failure

During the period that the power is off, you will not be able to make or receive calls with the telephone.

Caution

Use the specified battery pack.

Do not remove the battery from the handset to charge it.

Never throw the battery into a fire, disassemble it, or heat it.

Do not remove or damage the battery casing.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Wipe with a soft cloth that has been dampened with diluted, neutral deter- gent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or other chemical products. Doing so may discolor the surface of the telephone and damage the finish.

Additional Information

43

Image 43
Contents Exli Introduction FeaturesTable of contents 9 to10 Next, choose the best location to set up the base unitRead this first 6 toStep Checking the package contentsChoose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeToneTONE PulsePULSE Choose the dialing modeThis position lets you see Caller ID messages on the display Preparing the battery packWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Entering your area code On-hook dialing Making callsPress talk . Talk flashes on the display Dial the phone number Mute featureThen the volume setting is displayed Off-hook dialingOn-hook redialing RedialingLast three phone numbers dialed can be quickly redialed Press talk Talk appears flashing on the display Off-hook redialingAny key when paging Auto Talk when ringingAny key when ringing Mute when ringingEar Speaker volume Ringer switchRinger tone Storing phone numbers and names Memory storingPress and hold mem until Memory Store is displayed Redial/p keys to enter the phone number Number is displayed. The cursorAfter about 2 seconds, Memory Store is displayed Making calls with memory dialing Memory dialingOn-hook dialing Display a Programmed Number Off-hook dialingEditing Stored name and/or phone number Memory editingAfter about 2 seconds, Memory Press mem to exit edit modeDisplayed Erasing a stored name and phone number Memory erasingDeleting a phone number On-hook dial editingBell in mute MuteLDM Long Distance Manager Off-hook muteDo not use LDM On-hook dialingLongDst flashes on the display LongDst appears and remains onOff-hook memory dialing LDM Off-hook dialingOff-hook dialing Off-hook redialingLDM Private Branch Exchange PBX dialing To locate the handset PagingPress any key on the handset to end Press ¥or »to move the cursor to the item that is to be set Caller ID serviceSetting Caller ID options Caller IDHere are some typical displays When the telephone ringsViewing the Caller ID Message list Long Distance call settings and cancellationPress ¥or »to select Yes or Deleting information from the Caller ID listDeleting a Caller ID message Press delDisplay returns to the summary screen Deleting all Caller ID name/numbersSelect the phone number that you want to dial. See Using the Caller ID listCalling a party from the Caller ID list Long Distance callsEd memory numbers location, a verification screen Storing Caller ID messages in Memory dialingPress mem If a message has already been stored in the selectUsing Caller ID with call waiting service Changing the digital security code Additional informationStandard wall plate mounting Mounting the base unit on a wallWise 180 degrees Direct wall plate mountingOn the base unit, pull the handset Retainer out of the slot. Rotate it clockHeadset installation Installing the beltclipTo attach the beltclip To remove the beltclip Wipe with a soft, dry cloth MaintenanceBattery replacement and handling Power FailureTo help eliminate background TroubleshootingHandset SpecificationsGeneral Base unitW, X, Y, Z IndexAdditional Information Uniden America Corporation