Uniden EXLI 8962 owner manual Mounting the base unit on a wall, Standard wall plate mounting

Page 40

Plug the telephone line cord into the telephone outlet.

Wrap the AC adapter cord inside the molded wiring channel. Then wrap the cord around the strain relief notch.

Plug the AC adapter into a standard 120VAC wall outlet.

Raise the antenna to a vertical position.

Additional information

Mounting the base unit on a wall

[Standard wall plate mounting]

This phone can be mounted on any standard AT&T or GTE wall plate.

1	1 Snap the wall mount adapter into the
	notches on the base.

2, 3, 4, 5, 6, 7

Wall plate

2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack.

7 Align the mounting slots on the base.

AC adapter

with the mounting posts on the wall. Push in and down until the phone is firmly seated.

AC outlet

Image 40

Contents Exli Features IntroductionTable of contents Next, choose the best location to set up the base unit Read this first6 to 9 to10Checking the package contents StepSetting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode ToneTONE PulsePULSEPreparing the battery pack This position lets you see Caller ID messages on the displayWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Entering your area code On-hook dialing Making callsPress talk . Talk flashes on the display Mute feature Then the volume setting is displayedOff-hook dialing Dial the phone numberOn-hook redialing RedialingLast three phone numbers dialed can be quickly redialed Off-hook redialing Press talk Talk appears flashing on the displayAuto Talk when ringing Any key when ringingMute when ringing Any key when pagingEar Speaker volume Ringer switchRinger tone Storing phone numbers and names Memory storingPress and hold mem until Memory Store is displayed Redial/p keys to enter the phone number Number is displayed. The cursorAfter about 2 seconds, Memory Store is displayed Making calls with memory dialing Memory dialingOn-hook dialing Off-hook dialing Display a Programmed NumberMemory editing Editing Stored name and/or phone numberAfter about 2 seconds, Memory Press mem to exit edit modeDisplayed Memory erasing Erasing a stored name and phone numberOn-hook dial editing Deleting a phone numberMute LDM Long Distance ManagerOff-hook mute Bell in muteLDM On-hook dialing LongDst flashes on the displayLongDst appears and remains on Do not useLDM Off-hook dialing Off-hook dialingOff-hook redialing Off-hook memory dialingLDM Private Branch Exchange PBX dialing To locate the handset PagingPress any key on the handset to end Caller ID service Setting Caller ID optionsCaller ID Press ¥or »to move the cursor to the item that is to be setWhen the telephone rings Here are some typical displaysLong Distance call settings and cancellation Viewing the Caller ID Message listDeleting information from the Caller ID list Deleting a Caller ID messagePress del Press ¥or »to select Yes orDeleting all Caller ID name/numbers Display returns to the summary screenUsing the Caller ID list Calling a party from the Caller ID listLong Distance calls Select the phone number that you want to dial. SeeStoring Caller ID messages in Memory dialing Press memIf a message has already been stored in the select Ed memory numbers location, a verification screenUsing Caller ID with call waiting service Additional information Changing the digital security codeMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting On the base unit, pull the handsetRetainer out of the slot. Rotate it clock Wise 180 degreesHeadset installation Installing the beltclipTo attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingPower Failure Wipe with a soft, dry clothTroubleshooting To help eliminate backgroundSpecifications GeneralBase unit HandsetIndex W, X, Y, ZAdditional Information Uniden America Corporation