Uniden EXL 8900 Choose the dialing mode, Contact your telephone company for Assistance, Pulse

Page 10

Use only the supplied AD-420 AC

adapter. Do not use any other AC Polarity of the plug adapter.

Connect the AC adapter to a continuous power supply.

Place the base unit close to the

AC outlet so that you can unplug the

AC adapter easily.

If your telephone outlet isn't modular,	Modular
contact your telephone company for
assistance.

Choose the dialing mode

PULSE TONE

Depending on your dialing system, set the TONE/PULSE switch as follows:

If your dialing system is	Set the switch to
Tone	TONE
Pulse	PULSE

If you aren't sure of your dialing system

Make a trial call with the TONE/PULSE switch set to TONE.

If the call connects, leave the switch as is; otherwise, set to PULSE.

Image 10

Contents Page Features WelcomeControls and functions Talk Long Dst28 29 Contents Base unit Next, choose the best location to set up the base unitRead this first HandsetChecking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitContact your telephone company for Assistance Choose the dialing modeIf your dialing system is Set the switch to Tone PulseAdapter into Molded wiringSnap the wall mount Notches on the baseDirect wall plate mounting Slide the battery cover forward Charging the battery packInto the battery compartment Until it snaps into placeCleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsThis switch turns the handset ringer on or off Adjusting the volume control» Ringer Tone and Volume » Setting the Handset Earpiece VolumeMaking and receiving calls Using the LDM Long Distance Manager Follow the remaining steps in the Storing a Storing a number in memoryEntering a pause in memory dialing Number in Memory section to completeStoring mixed tone/pulse number Dialing a stored numberDial the main number Press mem twiceSelecting a different channel Using the flash buttonAgain to return to the previous call Traveling out-of-range MutePage/find Muting the ringer soundAdditional Information Changing the digital security codeTo attach the beltclip Installing the beltclipHeadset installation To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionBase unit SpecificationsGeneral HandsetK, L IndexW, X, Y, Z

contact your telephone company for

assistance.

Choose the dialing mode

If your dialing system is

Set the switch to

Tone

Pulse

If you aren't sure of your dialing system