Uniden EXL 8900 manual Direct wall plate mounting

Page 12

Handset retainer

8 On the base unit, pull the

 

handset retainer out of the slot.

 

Rotate it clockwise 180

 

degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place,

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

Make sure the wall material is capable of supporting the weight of the base and handset.

TOP

1 Insert two mounting screws

 

 

 

 

 

 

 

3/16 in.

 

 

 

 

 

 

 

into the wall, (with their

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

appropriate anchoring device),

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3-15/16 inches apart. Allow

 

 

 

 

 

 

 

 

about 3/16 of an inch between

 

 

 

 

 

 

 

3-15/16 in.

the wall and screwheads for

 

 

 

 

 

 

 

 

mounting the phone.

 

 

 

 

 

 

 

 

2 Refer to steps 1 through 9 on

 

 

 

 

 

 

 

 

page 8 - 9 to mount the

 

 

 

 

 

 

 

 

telephone.

9

Image 12
Contents Page Features WelcomeControls and functions Talk Long Dst28 29 Contents Next, choose the best location to set up the base unit Read this firstBase unit HandsetChecking the package contents Setting up the base unit Choose the best locationIf you want to install the base unit on the wall, see Connect the base unitChoose the dialing mode If your dialing system is Set the switch to ToneContact your telephone company for Assistance PulseMolded wiring Snap the wall mountAdapter into Notches on the baseDirect wall plate mounting Charging the battery pack Into the battery compartmentSlide the battery cover forward Until it snaps into placeBattery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solventsAdjusting the volume control » Ringer Tone and VolumeThis switch turns the handset ringer on or off » Setting the Handset Earpiece VolumeMaking and receiving calls Using the LDM Long Distance Manager Storing a number in memory Entering a pause in memory dialingFollow the remaining steps in the Storing a Number in Memory section to completeStoring mixed tone/pulse number Dialing a stored numberDial the main number Press mem twiceUsing the flash button Selecting a different channelAgain to return to the previous call Mute Page/findTraveling out-of-range Muting the ringer soundAdditional Information Changing the digital security codeInstalling the beltclip Headset installationTo attach the beltclip To remove the beltclipMaintenance Battery replacement and handlingTroubleshooting Symptom SuggestionSpecifications GeneralBase unit HandsetIndex K, LW, X, Y, Z