Uniden EXL 8900 Connect the base unit, If you want to install the base unit on the wall, see

Page 9

Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.

Connect the base unit

If you want to install the base unit on the wall, see page 8.

Route the cord.

To AC outlet

To DC IN 9V

AC adapter

1 (supplied) To telephone outlet

Telephone line cord (supplied)

To TEL LINE

Use only the Uniden AC adapter supplied with this phone. Do NOT use an outlet controlled by a wall switch.

1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.

2 Connect the AC adapter to the DC IN 9V jack and to a standard 120VAC wall outlet.

3 Set the base unit on a desk or tabletop and place the handset on the base unit.

Then raise the antenna to a vertical position.

Image 9

Contents Page Welcome FeaturesTalk Long Dst Controls and functions28 29 Contents Read this first Next, choose the best location to set up the base unitBase unit HandsetChecking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seeIf your dialing system is Set the switch to Tone Choose the dialing modeContact your telephone company for Assistance PulseSnap the wall mount Molded wiringAdapter into Notches on the baseDirect wall plate mounting Into the battery compartment Charging the battery packSlide the battery cover forward Until it snaps into placeWhen the battery charge becomes low Battery use time per chargeCleaning the battery contacts Do not use any liquids or solvents» Ringer Tone and Volume Adjusting the volume controlThis switch turns the handset ringer on or off » Setting the Handset Earpiece VolumeMaking and receiving calls Using the LDM Long Distance Manager Entering a pause in memory dialing Storing a number in memoryFollow the remaining steps in the Storing a Number in Memory section to completeDialing a stored number Storing mixed tone/pulse numberPress mem twice Dial the main numberUsing the flash button Selecting a different channelAgain to return to the previous call Page/find MuteTraveling out-of-range Muting the ringer soundChanging the digital security code Additional InformationHeadset installation Installing the beltclipTo attach the beltclip To remove the beltclipBattery replacement and handling MaintenanceSymptom Suggestion TroubleshootingGeneral SpecificationsBase unit HandsetIndex K, LW, X, Y, Z