Uniden EXL 8900 manual Snap the wall mount, Adapter into, Notches on the base, Plug the telephone

Page 11

Mounting the base unit on a wall

Standard wall plate mounting

This phone can be mounted on any standard telephone wall plate.

2 - 7

	1	Snap the wall mount
		adapter into the
		notches on the base.
	2	Plug the telephone
		line cord to the
		TEL LINE jack and the
		AC adapter to the
		DC IN 9V jack.
	3	Plug the telephone
		line cord into the
		telephone outlet.
	4	Wrap the AC adapter
		cord inside the
	6	molded wiring
	6	channel. Then wrap
	2	channel. Then wrap

the cord around the strain relief notch.

Wall plate

AC adapter

AC outlet

5 Plug the AC adapter into a standard

120V AC wall outlet.

6 Raise the antenna to a vertical position.

7 Align the mounting slots on the base. with the mounting posts on the wall. Push in and down until the phone is firmly seated.

Image 11

Contents Page Welcome FeaturesTalk Long Dst Controls and functions28 29 Contents Handset Next, choose the best location to set up the base unitRead this first Base unitChecking the package contents Choose the best location Setting up the base unitConnect the base unit If you want to install the base unit on the wall, seePulse Choose the dialing modeIf your dialing system is Set the switch to Tone Contact your telephone company for AssistanceNotches on the base Molded wiringSnap the wall mount Adapter intoDirect wall plate mounting Until it snaps into place Charging the battery packInto the battery compartment Slide the battery cover forwardDo not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contacts» Setting the Handset Earpiece Volume Adjusting the volume control» Ringer Tone and Volume This switch turns the handset ringer on or offMaking and receiving calls Using the LDM Long Distance Manager Number in Memory section to complete Storing a number in memoryEntering a pause in memory dialing Follow the remaining steps in the Storing aDialing a stored number Storing mixed tone/pulse numberPress mem twice Dial the main numberAgain to return to the previous call Using the flash buttonSelecting a different channel Muting the ringer sound MutePage/find Traveling out-of-rangeChanging the digital security code Additional InformationTo remove the beltclip Installing the beltclipHeadset installation To attach the beltclipBattery replacement and handling MaintenanceSymptom Suggestion TroubleshootingHandset SpecificationsGeneral Base unitW, X, Y, Z IndexK, L

Mounting the base unit on a wall

Snap the wall mount

adapter into the

notches on the base.

Plug the telephone

line cord to the

TEL LINE jack and the

AC adapter to the

DC IN 9V jack.

line cord into the

telephone outlet.

Wrap the AC adapter

cord inside the

molded wiring

channel. Then wrap

120V AC wall outlet.