If you select a memory location that does not have a stored number, the handset will beep rapidly and the phone will not dial.
Storing mixed tone/pulse number
If your have selected pulse dialing, you can store a mixed tone/pulse number (up to 20 digits) for memory dialing.
1 Remove the handset from the base and press mem . The talk/batt LED flashes and you hear a beep.
2 Enter the number to be dialed in pulse mode.
3 Press the */tone button on the handset. The */tone button counts as one digit and also enters a pause.
4 New enter the number(s) to be dialed in tone mode.
5 Press mem and a number
Dialing a stored number
To dial a phone number stored in memory, press talk , then press mem and the memory location
talk mem
If you press | LongDst |
instead of | talk , the |
LDM will be activated. | |
(See page 14 for details.)
16