Step 2: Setting up the base phone (continued)
Notes
•Use only the supplied
•Connect the AC power adapter to a continuous power supply.
•Place the base phone close to the AC outlet so that you can unplug the AC power adapter easily.
Tip
If your telephone outlet is not modular, contact your telephone service company for assistance.
Polarity of the plug
Modular
Choose the dialing mode
For the telephone to work properly, select an appropriate dialing mode (tone or pulse).
DIAL MODE switch
Depending on your dialing system, set the DIAL MODE switch as follows:
If your dialing system is | Set the switch to |
Tone | TONE |
Pulse | PULSE |
If you aren’t sure of your dialing system
Make a trial call with the DIAL MODE switch set to TONE.
If the call connects, leave the switch as is; otherwise, set to PULSE.
10
Getting Started