Setting up the answering machine (continued)
Setting the audible message alert
You can set the answering machine to record incoming messages (normal mode), or just make an announcement without recording messages (announcement only mode). To set an announcement only mode, see page 42.
In the normal mode, you have the option of having a beep to tell you if you have received any new incoming messages.
When you use this option, set the message alert to on. If you want the caller to leave message but not to use this option, set the message alert to off.
1 Press MENU repeatedly until you hear “Set message alert”. “-
SKIP/QUICK
REPEAT/SLOW VOL
2Press SELECT ,.
The present selected setting is announced. The display shows “On” or “OF” (off).
3Press REPEAT/SLOW or
SKIP/QUICK to set the audible
message alert on or off. The display shows “On” or “OF” (off).
4Press TIME/SET .
The setting is announced.
5Press PLAY/STOP to exit the menu setup mode.
Notes
•When the audible message alert is turned on, you will hear a beep every 5 seconds if there are any new messages.
•To stop the beep, press any button related to the answering machine function
or VOL | / VOL . |
•The audible message alert is preset to “On”.
36
Answering Machine Features