Operating from an outside phone (continued)
Picking up new messages
1Call your telephone number from a
2When you hear the greeting, press and enter your remote ID code (security code).
You will hear a confirmation beep.
The number of new messages will be announced.
3Press the keys in the “Table of control codes” below for the desired operation command.
4When you finish, disconnect the line.
Notes
•Do not let two seconds elapse between each digit of the remote ID code (security code) and the control code.
•If you did not turn on the answering machine, your phone answers automatically after 10 rings.
•If you enter wrong remote ID code (security code) three times, the line will disconnect.
•If no keys are pressed within 20 seconds, the line will disconnect.
Tip
Cut off the Remote Control Card and carry it with you to see how to operate from an outside phone.
Table of control codes
To | Key | Notes |
Play back messages in MAILBOX1 | 1 | Plays back from the first new message. |
Play back messages in MAILBOX2 | 2 | Plays back from the first new message. |
Play back messages in MAILBOX3 | 3 | Plays back from the first new message. |
Repeat backward | 4 | Press during play back to repeat a |
|
| message. |
Skip forward | 6 | Press during play back to skip forward. |
Erase individual message | 9 | Press during play back. |
Erase all the messages in MAILBOX1 | 9 | 1 |
Erase all the messages in MAILBOX2 | 9 | 2 |
Erase all the messages in MAILBOX3 | 9 | 3 |
Record greeting | 7 | “Now recording” is announced. |
Turn answering machine on | 0 | Turns the system on. “Answering |
|
| function is on” is announced. |
Turn answering machine off | 0 | Turns the system off. “Answering |
|
| function is off” is announced. |
Stop operation |
| Stops every function. |
46
Answering Machine Features