Uniden EXS9005 manual Radio Interference, More Than One Cordless Telephone

Page 10

Radio Interference

Radio interference may occasionally cause buzzing and humming in your cordless Handset, or clicking noises in the Base Unit. This interference is caused by external sources such as TV, refrigerator, vacuum cleaner, fluorescent lighting, or electrical storm. Your unit is NOT DEFECTIVE. If these noises continue and are too distracting, please check around your home to see what appliances may be causing the problem. In addition, we recommend that the Base Unit not be plugged into a circuit that also powers a major appliance because of the potential for interference. Be certain that the antenna on the unit is fully extended when needed.

In the unlikely event that you consistently hear other voices or distracting transmissions on your phone, you may be receiving radio signals from another cordless telephone or other source of interference.

Finally, it should be noted that some cordless telephones operate at frequencies that may cause interference to nearby TVs and VCRs. To minimize or prevent such interference, the base of the cordless telephone should not be placed near or on top of a TV or VCR. If interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference.

More Than One Cordless Telephone

Don’t operate two cordless phones too close to each other because of the interference. This interference can be reduced by lowering your base unit antenna (reducing its range).

Privacy

Note: Cordless telephones are radio devices. Communications between the handset and the base of your cordless telephone are accomplished by means of radio waves which are broadcast over the open airways. Because of the inherent physical properties of radio waves, your communications can be received by radio receiving devices other than your own cordless telephone unit. Consequently, any communications using your cordless telephone may not be private.

Important Electrical Considerations

EXS9005

7

Image 10
Contents Page Precautions Rechargeable Nickel-Cadmium Battery WarningControls and Keys Contents Important Safety Instructions Battery Safety Precautions Features IntroductionIncluded with the EXS9005 Included with the EXS9005Important Electrical Considerations Telephone Line ProblemsRange Radio Interference More Than One Cordless TelephoneSelecting a Location InstallationConnecting the Telephone Cords Telephone Line OutletsApplying Power to the Base Unit Adapter Safety FeatureDesk or Tabletop Installation Use only the Uniden AC Adapter supplied with this phone Wall Installation Standard Wall Plate MountingSeated Direct Wall Mounting Installation Do not use an outlet controlled by a wall switch Installing the Handset Battery Pack Setting Up Your PhoneRaising the Antenna Charging the Battery Pack Initial Battery ChargingLow Battery Indicator Battery Memory EffectCleaning the Battery Contacts Setting the Pulse/Tone SwitchRinger Tone and Volume Adjusting Ringer ControlsReceiver volume Attach the beltclip Changing the BeltclipRemove the Beltclip Making and Receiving Calls Using Your PhoneFlash and Page/Find Programming Your Phone Storing a Number in MemoryStoring a Mixed Number Programming Your Phone5551212 3300 Dialing a Stored Number ExampleChain Dialing Erasing a Stored NumberTroubleshooting Problem SuggestionBase Unit SpecificationsHandset One Year Limited Warranty Uniden America CorporationUniden America Corporation