Uniden EXS9005 manual Do not use an outlet controlled by a wall switch

Page 19

6.Plug one end of the short telephone cord into the TEL LINE jack on the Base Unit.

Put the cord inside the molded channel on the bottom of the Base Unit.

7.Place the Base Unit on the screws and push down until it’s firmly seated.

8.Plug the other end of the telephone line cord into the wall jack.

9.Plug the AC Adapter into a standard 120 VAC wall outlet.

✻Do not use an outlet controlled by a wall switch.

16

EXS9005

Image 19

Contents Page Rechargeable Nickel-Cadmium Battery Warning PrecautionsControls and Keys Contents Important Safety Instructions Battery Safety Precautions Introduction FeaturesIncluded with the EXS9005 Included with the EXS9005Important Electrical Considerations Telephone Line ProblemsRange More Than One Cordless Telephone Radio InterferenceTelephone Line Outlets InstallationConnecting the Telephone Cords Selecting a LocationAdapter Safety Feature Applying Power to the Base UnitDesk or Tabletop Installation Use only the Uniden AC Adapter supplied with this phone Standard Wall Plate Mounting Wall InstallationSeated Direct Wall Mounting Installation Do not use an outlet controlled by a wall switch Installing the Handset Battery Pack Setting Up Your PhoneRaising the Antenna Initial Battery Charging Charging the Battery PackBattery Memory Effect Low Battery IndicatorSetting the Pulse/Tone Switch Cleaning the Battery ContactsRinger Tone and Volume Adjusting Ringer ControlsReceiver volume Attach the beltclip Changing the BeltclipRemove the Beltclip Making and Receiving Calls Using Your PhoneFlash and Page/Find Storing a Number in Memory Programming Your PhoneProgramming Your Phone Storing a Mixed Number5551212 3300 Example Dialing a Stored NumberErasing a Stored Number Chain DialingProblem Suggestion TroubleshootingBase Unit SpecificationsHandset Uniden America Corporation One Year Limited WarrantyUniden America Corporation