Uniden EXS9005 manual Cleaning the Battery Contacts, Setting the Pulse/Tone Switch

Page 23

Cleaning the Battery Contacts

To maintain a good charge, it is important to clean all charging contacts on the Handset and Base Unit about once a month. Use a pencil eraser or other contact cleaner. Do not use any liquids or solvents.

Setting the Pulse/Tone Switch

Be sure the PULSE/TONE switch is in the TONE position.

✻Most phone systems are Tone dialing. Check with your local phone company if you are not sure whether your system is Tone or Pulse dialing

20

EXS9005

Image 23

Contents Page Rechargeable Nickel-Cadmium Battery Warning PrecautionsControls and Keys Contents Important Safety Instructions Battery Safety Precautions Introduction FeaturesIncluded with the EXS9005 Included with the EXS9005Range Telephone Line ProblemsImportant Electrical Considerations More Than One Cordless Telephone Radio InterferenceTelephone Line Outlets InstallationConnecting the Telephone Cords Selecting a LocationAdapter Safety Feature Applying Power to the Base UnitDesk or Tabletop Installation Use only the Uniden AC Adapter supplied with this phone Standard Wall Plate Mounting Wall InstallationSeated Direct Wall Mounting Installation Do not use an outlet controlled by a wall switch Raising the Antenna Setting Up Your PhoneInstalling the Handset Battery Pack Initial Battery Charging Charging the Battery PackBattery Memory Effect Low Battery IndicatorSetting the Pulse/Tone Switch Cleaning the Battery ContactsReceiver volume Adjusting Ringer ControlsRinger Tone and Volume Remove the Beltclip Changing the BeltclipAttach the beltclip Flash and Page/Find Using Your PhoneMaking and Receiving Calls Storing a Number in Memory Programming Your PhoneProgramming Your Phone Storing a Mixed Number5551212 3300 Example Dialing a Stored NumberErasing a Stored Number Chain DialingProblem Suggestion TroubleshootingHandset SpecificationsBase Unit Uniden America Corporation One Year Limited WarrantyUniden America Corporation