Uniden SS E15+1 owner manual Liquid Damage, Case Action

Page 41

Liquid Damage

Moisture and liquid can damage your cordless phone. In case of accidental submersion, please read the following steps.

Case

 

Action

If the handset or base is

Wipe off the liquid, and use as normal.

exposed to moisture or

 

 

liquid, but it only affects the

 

 

exterior plastic housing.

 

 

 

 

If moisture or liquid has

Handset:

entered the plastic- housing

1)

Remove the battery cover and leave it off for ventilation.

(i. e. liquid can be heard in

2)

Remove the battery pack by disconnecting.

the phone or liquid has

3)

Leave the battery cover off and the battery pack disconnected for at least 3 days.

entered the handset battery

4)

Once the handset is completely dry, reconnect the battery pack and the battery

compartment or vent

 

cover.

openings on the base).

5)

Recharge the handset's battery pack for 20 hours before using again.

Base:

1)Disconnect the AC adaptor from the base unit, cutting off electrical power.

2)Disconnect the telephone cord from the base unit.

3)Let dry for at least 3 days.

IMPORTANT: You must unplug the telephone line while recharging the battery pack to avoid charge interruption.

CAUTION: DO NOT use a microwave oven to speed up the drying process. This will cause permanent damage to the handset, base and the microwave oven. After following these steps, if your cordless telephone does not work, please visit our website for further information (www.uniden.com.au or www.uniden.co.nz).

[39]

ADDITIONAL INFORMATION

Image 41
Contents SS E15+1 Page Contents Cidcw Welcome FeaturesSelect/channel key p /20 Controls and FunctionsTerms Used in this Manual Choose the best location Installing the PhoneInstall the Rechargeable Battery Packs into the Handsets Getting Started Set the Visual Ringer Brightness Standard wall plate mounting Mount the Base Unit on a WallHeadset Installation Installing the BeltclipTo attach the beltclip To remove the beltclipRegister Handsets to the Main Base before Using When to Re-register Handsets Activating Caller ID on Call Waiting Activating AutoTalkSetting Name Tag POP ID Setting the Insert Handset ringer tone and volume Base ringer volumeBase ringer on/off Base ringer toneMaking and Receiving Calls Using Your PhoneRedialing the last dialed number Transferring a CallTraveling Out-of-Range Adjusting the Handset Earpiece VolumeAudio boost Find Handsets Selecting a Different ChannelVisual Message Waiting Indicator Using Call WaitingStoring the Emergency Dial Emergency DialStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name Using the Speed Dial Memory Storing Caller ID Messages in Speed Memory Locations Easy Dial Making Calls from Speed Dial MemoryCaller ID and Cidcw Caller ID on Call Waiting When the Telephone RingsViewing the Caller ID Message List Caller ID FeaturesDeleting a Caller ID message Deleting Information from the Caller ID ListPress the delete/transfer key Deleting all Caller ID names/numbersMaking a Call from the Caller ID List Changing the Digital Security Code Low battery alert Power Failure Battery replacement and handlingMaintenance SymptomSuggestion TroubleshootingSuggestion SymptomCase Action Liquid DamageAC Adapter Information For the base Battery InformationGeneral Information K, L IndexO, P, Q X , Y, ZUniden SSE15+1 Cordless Phone One Year Limited WarrantyAustralia NEW Zealand Page Page Thank YOU for Buying a Uniden Product