Uniden SS E15+1 General Information, AC Adapter Information For the base, Battery Information

Page 42

General Information

Operating temperature: -10° to +50°C (+14°F to +122°F)

AC Adapter Information

(for the base)

(for the charger)

AC Adapter part number:

AAD--041S

AAD--600S

Input Voltage:

230-240V AC 50Hz

230-240V AC 50Hz

Output Voltage:

9V DC 350 mA

9V DC 210 mA

Battery Information

Battery part number:

BT-905

or

BT-905s

Capacity:

600 mAh, 3.6V

 

500 mAh, 3.6V

To avoid damage to the phone use only Uniden AAD--041S, AAD--600S and BT-905 or BT-905s with your phone.

If the handset is left off of the base, the actual Talk mode duration will be reduced respective to the amount of time the handset is off the cradle.

Recharge your phone on a regular basis by returning the handset to either cradle after each phone call.

When the operating time becomes short, even after the battery is recharged, please replace the battery. With normal usage, the battery should last about one year.

A replacement Uniden adapter and battery may be purchased at your local Uniden dealer or by visiting our website at; www.uniden.com.au or www.uniden.co.nz

Specifications, features, and availability of optional accessories are all subject to change without prior notice.

[40]

Image 42
Contents SS E15+1 Page Contents Welcome Features CidcwControls and Functions Select/channel key p /20Terms Used in this Manual Installing the Phone Choose the best locationInstall the Rechargeable Battery Packs into the Handsets Getting Started Set the Visual Ringer Brightness Mount the Base Unit on a Wall Standard wall plate mountingTo attach the beltclip Installing the BeltclipHeadset Installation To remove the beltclipRegister Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Activating Caller ID on Call WaitingSetting Name Tag POP ID Setting the Insert Base ringer on/off Base ringer volumeHandset ringer tone and volume Base ringer toneUsing Your Phone Making and Receiving CallsTransferring a Call Redialing the last dialed numberAdjusting the Handset Earpiece Volume Audio boostTraveling Out-of-Range Selecting a Different Channel Find HandsetsUsing Call Waiting Visual Message Waiting IndicatorEmergency Dial Storing the Emergency DialUsing the Speed Dial Memory Storing Names and Numbers in Speed Dial MemoryIf you make a mistake while entering a name Using the Speed Dial Memory Storing Caller ID Messages in Speed Memory Locations Making Calls from Speed Dial Memory Easy DialWhen the Telephone Rings Caller ID and Cidcw Caller ID on Call WaitingCaller ID Features Viewing the Caller ID Message ListDeleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Press the delete/transfer keyMaking a Call from the Caller ID List Changing the Digital Security Code Low battery alert Battery replacement and handling Power FailureMaintenance Troubleshooting SymptomSuggestionSymptom SuggestionLiquid Damage Case ActionBattery Information General InformationAC Adapter Information For the base O, P, Q IndexK, L X , Y, ZOne Year Limited Warranty Uniden SSE15+1 Cordless PhoneAustralia NEW Zealand Page Page Thank YOU for Buying a Uniden Product