Uniden SS E15+1 owner manual Installing the Beltclip, Headset Installation, To attach the beltclip

Page 12

•Try to mount your phone within 1.5m of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

•Use #10 screws (minimum length of 35mm) with anchoring devices suitable for the wall material where the base unit will be placed.

1)Insert two mounting screws into the wall, (with their appropriate anchoring device), 100mm apart. Allow about 3mm

between the wall and screw heads for mounting the phone.

2)Refer to steps 1 through 9 on page 9 to mount the telephone.

Installing the Beltclip

To attach the beltclip

Insert the beltclip into the holes on each side of the handset. Press down until it clicks.

To remove the beltclip

Pull both sides of the beltclip to release the tabs from the holes.

3mm

100mm

Headset Installation

Your phone may be used with an optional headset.

To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands-free conversations.

(Headset may be purchased by visiting our website at; www.uniden.com.au or www.uniden.co.nz )

[10]

Image 12

Contents SS E15+1 Page Contents Welcome Features CidcwControls and Functions Select/channel key p /20Terms Used in this Manual Installing the Phone Choose the best locationInstall the Rechargeable Battery Packs into the Handsets Getting Started Set the Visual Ringer Brightness Mount the Base Unit on a Wall Standard wall plate mountingInstalling the Beltclip Headset InstallationTo attach the beltclip To remove the beltclipRegister Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Activating Caller ID on Call WaitingSetting Name Tag POP ID Setting the Insert Base ringer volume Handset ringer tone and volumeBase ringer on/off Base ringer toneUsing Your Phone Making and Receiving CallsTransferring a Call Redialing the last dialed numberAdjusting the Handset Earpiece Volume Audio boostTraveling Out-of-Range Selecting a Different Channel Find HandsetsUsing Call Waiting Visual Message Waiting IndicatorEmergency Dial Storing the Emergency DialUsing the Speed Dial Memory Storing Names and Numbers in Speed Dial MemoryIf you make a mistake while entering a name Using the Speed Dial Memory Storing Caller ID Messages in Speed Memory Locations Making Calls from Speed Dial Memory Easy DialWhen the Telephone Rings Caller ID and Cidcw Caller ID on Call WaitingCaller ID Features Viewing the Caller ID Message ListDeleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Press the delete/transfer keyMaking a Call from the Caller ID List Changing the Digital Security Code Low battery alert Battery replacement and handling Power FailureMaintenance Troubleshooting SymptomSuggestionSymptom SuggestionLiquid Damage Case ActionBattery Information General InformationAC Adapter Information For the base Index K, LO, P, Q X , Y, ZOne Year Limited Warranty Uniden SSE15+1 Cordless PhoneAustralia NEW Zealand Page Page Thank YOU for Buying a Uniden Product