Uniden SS E15+1 owner manual Install the Rechargeable Battery Packs into the Handsets

Page 8

Use only the

Uniden

rechargeable battery pack (BT-905 or BT-905s) supplied with your cordless telephone.

B. Install the Rechargeable Battery Packs into the Handsets

Both handsets are powered by rechargeable battery packs. The battery recharges automatically when the handset is placed in the main base or charging cradle.

1) Locate the separate battery and battery cover.

2) Plug the battery pack connector (red & black wires) into the jack inside the battery compartment. (The connector notches fit into the grooves of the jack only one way.)

Match the wire colors to the polarity label in the battery compartment, connect the battery, and listen for a click to insure connection.

3) Make sure you have a good connection by slightly pulling on the battery wires. If the connection is secure, the battery jack will remain in place.

4) Place the battery case cover back on the handset by sliding it upwards until it clicks into place.

[6]

Image 8

Contents SS E15+1 Page Contents Welcome Features CidcwControls and Functions Select/channel key p /20Terms Used in this Manual Installing the Phone Choose the best locationInstall the Rechargeable Battery Packs into the Handsets Getting Started Set the Visual Ringer Brightness Mount the Base Unit on a Wall Standard wall plate mountingInstalling the Beltclip Headset InstallationTo attach the beltclip To remove the beltclipRegister Handsets to the Main Base before Using When to Re-register Handsets Activating AutoTalk Activating Caller ID on Call WaitingSetting Name Tag POP ID Setting the Insert Base ringer volume Handset ringer tone and volumeBase ringer on/off Base ringer toneUsing Your Phone Making and Receiving CallsTransferring a Call Redialing the last dialed numberTraveling Out-of-Range Adjusting the Handset Earpiece VolumeAudio boost Selecting a Different Channel Find HandsetsUsing Call Waiting Visual Message Waiting IndicatorEmergency Dial Storing the Emergency DialUsing the Speed Dial Memory Storing Names and Numbers in Speed Dial MemoryIf you make a mistake while entering a name Using the Speed Dial Memory Storing Caller ID Messages in Speed Memory Locations Making Calls from Speed Dial Memory Easy DialWhen the Telephone Rings Caller ID and Cidcw Caller ID on Call WaitingCaller ID Features Viewing the Caller ID Message ListDeleting Information from the Caller ID List Deleting a Caller ID messageDeleting all Caller ID names/numbers Press the delete/transfer keyMaking a Call from the Caller ID List Changing the Digital Security Code Low battery alert Battery replacement and handling Power FailureMaintenance Troubleshooting SymptomSuggestionSymptom SuggestionLiquid Damage Case ActionAC Adapter Information For the base Battery InformationGeneral Information Index K, LO, P, Q X , Y, ZOne Year Limited Warranty Uniden SSE15+1 Cordless PhoneAustralia NEW Zealand Page Page Thank YOU for Buying a Uniden Product