Uniden SS E15+1 owner manual Getting Started

Page 9

C. Connect the Base Unit and charging cradle, and Charge the Handsets

1) Connect each AC adapter to the DC in 9V jack and to each standard 240V AC wall outlet.

• Connect each AC adapter to a continuous power supply.

• Place the base unit close to the AC outlet so that you can unplug the AC

adapter easily.

! Use only the

supplied

AAD--041S

AC adaptor

for the base

and AAD-

GETTING STARTED

2)Place one handset in the main base and the other in the charging cradle with the keypad facing forward.

3)Make sure that the charge/in use LED and charge LED illuminate. If the LED does not illuminate, check to see that the AC adapter is plugged in and the handset makes good contact with the cradle's charging contacts.

Route the cord

To AC Outlet

AC Adapter

To DC IN 9V

(supplied)

 

 

600S AC

 

adaptor for

 

the charger.

!

Do not use

 

any other AC

 

adapter.

!

Do not place

 

the power cord

 

where it

 

creates a trip

 

hazard or

4)Charge the handset battery packs for at least 15-20 hours before using your new cordless telephone for the first time! To maximize the charge capacity of your battery pack, DO NOT plug the telephone cord into the base unit and wall jack until the battery is fully charged.

[7]

where it could

become

chafed and

create a fire or

electrical

hazard.

Image 9
Contents SS E15+1 Page Contents Cidcw Welcome FeaturesSelect/channel key p /20 Controls and FunctionsTerms Used in this Manual Choose the best location Installing the PhoneInstall the Rechargeable Battery Packs into the Handsets Getting Started Set the Visual Ringer Brightness Standard wall plate mounting Mount the Base Unit on a WallHeadset Installation Installing the BeltclipTo attach the beltclip To remove the beltclipRegister Handsets to the Main Base before Using When to Re-register Handsets Activating Caller ID on Call Waiting Activating AutoTalkSetting Name Tag POP ID Setting the Insert Handset ringer tone and volume Base ringer volumeBase ringer on/off Base ringer toneMaking and Receiving Calls Using Your PhoneRedialing the last dialed number Transferring a CallAdjusting the Handset Earpiece Volume Audio boostTraveling Out-of-Range Find Handsets Selecting a Different ChannelVisual Message Waiting Indicator Using Call WaitingStoring the Emergency Dial Emergency DialStoring Names and Numbers in Speed Dial Memory Using the Speed Dial MemoryIf you make a mistake while entering a name Using the Speed Dial Memory Storing Caller ID Messages in Speed Memory Locations Easy Dial Making Calls from Speed Dial MemoryCaller ID and Cidcw Caller ID on Call Waiting When the Telephone RingsViewing the Caller ID Message List Caller ID FeaturesDeleting a Caller ID message Deleting Information from the Caller ID ListPress the delete/transfer key Deleting all Caller ID names/numbersMaking a Call from the Caller ID List Changing the Digital Security Code Low battery alert Power Failure Battery replacement and handlingMaintenance SymptomSuggestion TroubleshootingSuggestion SymptomCase Action Liquid DamageBattery Information General InformationAC Adapter Information For the base K, L IndexO, P, Q X , Y, ZUniden SSE15+1 Cordless Phone One Year Limited WarrantyAustralia NEW Zealand Page Page Thank YOU for Buying a Uniden Product