Uniden WDECT 2355+2 Replacing the Base, Call Transfer Feature, Hold,to Transfer Handset

UP354BH(WDECT2355+2) OM 5/14/04 10:53 AM Page 60

For model number verification, visit our website www.uniden.com.au

or www.uniden.co.nz

[ 60 ]

Call Transfer Feature

From handset to handset or to the base

1)During a call, press /transfer/int’com on the handset.

2)Select a handset or the base to transfer the call within

10 seconds. (Refer to step 2 in the intercom section on					Hold,to	transfer
page 59).					Handset	#2
The call will automatically be placed on hold, and an					Base
intercom tone sounds.
To cancel the transfer, press			or	on the initiating handset.
3) On the receiving handset, to answer the page, press					or
	/transfer/int’com (or		or intercom on the base). Or press any number key,
	, or	(when Any Key Answer is on), or pick up the handset from the
cradle (When Auto Talk is on).
4) To speak to the caller, press			(or	on the base) on the receiving handset.

From the base to a handset

1)During a call, press intercom on the base. The call will automatically be placed on hold.

2)Select the handset you want to talk with by pressing the number key (1-4). To page all

the handsets press . An intercom tone sounds. To cancel the transfer, press

intercom or on the base.

3)On the receiving handset, press or /transfer/int’com to answer the

page. Or press any number key, , or (when Any Key Answer is On), or pick up the handset from the cradle (when AutoTalk is On). The intercom mode is activated, but the caller is still on hold.

4)To speak to the caller, press or speaker on the receiving handset.

REPLACING THE BASE

If the base unit is replaced with a different base from this same series of cordless models, you must clear the handset(s) and base identification numbers. To do this, select “System Reset” from handsets display menu option list (see page 21 for guidance).