Uniden UIP 160P owner manual Symptom Suggestion

	Symptom	Suggestion
	The audio sounds weak.	• Move the handset and/or base away from metal objects or appliances and try again.
		• Make sure that you are not too far from the base.
		• Check both ends of the base telephone line cord.
		• Make sure the AC adapter is plugged into the base and wall outlet.
		• Disconnect the AC adapter for a few minutes, and then reconnect it.
	Can't make or receive calls.	• De-register the handset (see "De-register the Handset" on page 15) and register the handset
		(see "Register the Handset" on page 14).
		• Make sure that you are not too far from the base.
		• Make sure the line is not in use.
		• If an outside call is already established, you can not make another outside call.
		• Charge the batteries in the handset for 15-20 hours by placing the handset on the base or
	The handset doesn't ring or	charging cradle.
		• Make sure that you are not too far from the base.
	receive a page.
		• De-register the handset (see "De-register the Handset" on page 15) and register the handset
		(see "Register the Handset" on page 14).
	Unavailable appears in	• Make sure that another handset(s) is not in use, and try the phone again.
	the display.	• Make sure that you are not too far from the base.
		• Keep the handset away from microwave ovens, computers, remote control toys, wireless
	Severe noise interference.	microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical
		appliances.
		• Move to another location or turn off the source of interference.
		• The handset was picked up before the second ring.
	Caller ID does not display.	• The call was placed through a switchboard.
		• Contact your service provider to verify the Caller ID settings. There can be a problem with your
		Caller ID service.
w w w . u n i d e n . c o m		T R O U B L E S H O O T I N G [ 6 2 ]

T R O U B L E S H O O T I N G