Symptom |
| Suggestion |
The answering system does | • | Make sure the base unit is plugged in. |
not work. | • | Make sure that the answering system is turned on. |
| • | Make sure that the message record time is not set to ANN |
|
| (See page 42). |
Messages are incomplete. | • | The incoming messages may be too long. Remind callers to leave a |
|
| brief message. |
| • | The memory may be full. Delete some or all of the |
|
| saved messages. |
After a power failure, the | • | Record your greeting again. |
outgoing message is deleted. |
| The preset messages should remain. |
No sounds on the base unit | • | Adjust the speaker volume on the base unit. |
speaker during call |
|
|
monitoring or message |
|
|
playback. |
|
|
Cannot access remote | • | Make sure you are using the correct PIN number. |
features from another touch- | • | Make sure that the |
tone phone. |
| tone for at least two seconds. If it cannot, you may have to use |
|
| another phone to access your message. |
Severe noise interference | • | Keep the handset away from microwave ovens, computers, remote |
|
| control toys, wireless microphones, alarm systems, intercoms, room |
|
| monitors, fluorescent lights and electrical appliances. |
| • | Move to another location or turn off the source of interference. |
|
|
|
[ 48 ] | A D D I T I O N A L I N F O R M A T I O N |
A D D I T I O N A L I N F O R M A T I O N