I N S T A L L I N G T H E H A N D S E T B A T T E R Y P A C K
Charge the battery pack for at least
1 Press in on the battery cover release and slide the cover down until it comes off.
2Connect the battery pack connector with the correct polarity (black
and red wires), then insert the battery pack into the battery compartment.
3 Slide the battery cover forward until it snaps into place.
4Place the handset on the base.
5 Make sure that the “status” LED lights. If the LED doesn’t light, check to see that the AC adapter is plugged in and that the handset makes good contact with the base charging contacts.
Use only the Uniden Battery
[ 10 ] | G E T T I N G S T A R T E D |