Operations Common to Each Mode, To change settings

English

Operations Common to Each Mode

To change settings

1.Press and hold the [DISP] button (1 sec.) to switch to the adjustment display.

2.Press [x] or [v] to select the “item name” as follows:

“CLOCK” ↔ “SETTINGS” ↔ “SCRN SVR” ↔“SCROLL” ↔ “DIMMER” ↔ “TEL-SP”

↔“TEL-SW”

∗The adjustment item will be displayed for 2 seconds before showing the desired value.

3.Turn the [ROTARY] knob to select the desired value.

∗When “ENT” is flashing in the display, press the [ ] button to adjust setting value.

4.After completing settings, press the [DISP] button to return to the previous mode.

●Setting the clock

2-1. Select “CLOCK”.

3-1. Press the [ ] button

3-2. Press [x] or [v] to select the hour or minute.

3-3. Turn the [ROTARY] knob to set the time.

∗The clock is displayed in 12-hour format. 3-4. Press the [ ] button to store the time in

memory and return to the previous mode.

Note:

•You cannot set the clock when it is displayed with only the car’s ignition on. If the car’s battery dies or is removed, or the unit is removed, the clock will be reset. If another button/operation is selected while setting the clock, the clock set mode is canceled.

●Displaying the settings

You can see the state of current settings at any operation mode.

2-1. Select “SETTINGS”.

3-1. Turn the [ROTARY] knob to display the current settings.

∗When the setting is selected, the current state will be displayed after 1 second.

Example:

After 1 second:

●Turning the screen saver on/off

This unit has a screen saver function in which various patterns and random characters can be displayed on the operation status indication area. This function can be turned on/off. If a button is pressed while the screen saver is on, the corresponding operation display is shown for about 30 seconds, and then the display returns to the screen saver.

∗The factory default setting is “ON”.

2-1. Select “SCRN SVR”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

●Setting title scroll method

Set how to scroll in CD-TEXT and MP3/WMA titles.

∗The factory default setting is “ON”.

2-1. Select “SCROLL”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

•ON: Scroll automatically.

•OFF: Scroll 1 time only.

●Setting dimmer control

Dimmer control can be set “ON” or “OFF”.

∗The factory default setting is “ON”.

2-1. Select “DIMMER”.

3-1. Turn the [ROTARY] knob to select “ON” or “OFF”.

●Setting car speaker output for cell

phones

When the AUX input jack is used to connect an AUX BLUETOOTH BB (BLT370) (sold separately):

∗The factory default setting is “RIGHT”.

∗To output the telephone calls, set cell phone interrupt to “ON”.

2-1. Select “TEL-SP”.

3-1. Turn the [ROTARY] knob to select “RIGHT” or “LEFT”.

•RIGHT: Telephone calls can be heard on the front right speaker connected to this unit.

•LEFT: Telephone calls can be heard on the front left speaker connected to this unit.

14 CZ209