English
•When a USB memory device is composed of two or more drives, only one of the drives will be detected.
•USB memory devices with security functions are not supported.
•The order in which tracks are recorded may differ depending on the USB memory device (the actual playback order may not be the same as that indicated on your computer’s display).
CAUTION
•Insert and remove a USB memory device only when the device is not being accessed. Connecting/disconnecting the device at the following times may result in the loss of data:
•If the USB memory device is removed or power is disconnected during writing to the device.
•When the device is subject to static electricity or electric noise.
•Do not leave a USB memory device unattended in an automobile. Exposure to direct sunlight or high temperatures may cause deformation or other malfunction of the USB memory device.
Connecting a USB memory device
1.Connect the USB memory device to the USB cable. Press the [SRC] button to switch the source to the device.
Playback will begin from the first file recorded on the device.
∗Always insert the device fully into the connector. Incomplete connections may cause the device not to be recognized.
∗Depending on the number of tracks recorded, some of time may be required until all tracks are read into the unit.
To listen to tracks on a connected USB memory device
1.Press the [SRC] button to switch sources When USB memory device is selected, playback will begin from the location at which playback was previously stopped.
∗When a USB memory device is disconnected and reconnected, playback will begin from the previous track of the USB memory device.
To stop play
1.Press the [SRC] button and switch the source to something other than the USB memory device.
2.Remove the USB memory device from the USB cable.
CAUTION
Do not remove the USB memory device while USB mode is selected, as it may result in loss of or damage to data on the USB memory device.
Always backup and save important data on your computer.
16 CZ209