Clarion CZ209 owner manual Error Displays, English

	Problem	Cause	Measure	English
	No sound	WMA format.	Record MP3/WMA files properly to the device.
		The device contains no MP3/
		WMA files.
		The files are not proper MP3/	Use properly encoded MP3/WMA files.
		Files are DRM copyright	See page 11 for details on how to cancel DRM
		protected.	protection.
		Connectors are loose.	Disconnect the device and reconnect securely.
		Some USB portable music	Check operation of portable music player.
		players may consume current
		that exceeds the USB rating.
		In this case, this unit’s
USB/iPod	Sound is	overcurrent protection circuit	Use properly encoded MP3/WMA files.
		MP3/WMA files are not
		operates to stop the music
		playback.
	interrupted or has	encoded properly.
	noise.
	Device isn’t	Device is damaged.	Disconnect and reconnect the device. If device still
	recognized.		cannot be recognized, try replacing with different
		Connectors are loose.
			device.
		According to the device’s	Disconnect and reconnect the device.
		operation state, device may
		not be recognized.
	Cannot connect	Device has been connected	Connect the device in reverse direction.
	device to the USB	improperly.
	cable.
		Connector is broken.	Replace with a new device.

9. ERROR DISPLAYS

If an error occurs, one of the following messages is displayed.

Take the measures described below to eliminate the problem.

	Error Display	Cause	Measure
CD/MP3/WMA	ERROR 2	A CD is caught inside the CD	This is a failure of the CD deck mechanism. Consult
		deck and is not ejected.	your dealer.
	ERROR 3	A CD cannot be played due	Replace with a non-scratched, non-warped disc.
		to scratches, etc.
	ERROR 6	A CD is loaded upside-down	Eject the disc and reload properly.
		inside the CD deck and does
		not play.

CZ209 21