Accessories, USB Operations, AUX function

●Cell phone interrupt setting

If you connect this unit and your cell phone with an optional cable, you can listen to your calls on your car speakers.

When the AUX input jack is used to connect an AUX BLUETOOTH BB (BLT370) (sold separately):

∗The factory default setting is “OFF”.

2-1. Select “TEL-SW”.

3-1. Turn the [ROTARY] knob to select setting. When turning the [ROTARY] knob, the setting changes as follows:

“OFF” ↔ “ON” ↔ “MUTE”

•OFF: This unit continues normal operation even when the cell phone is used.

•ON: Telephone calls can be heard from the speakers connected to the unit.

∗When listening to calls on your car speakers, turn the [ROTARY] knob to adjust the volume.

•MUTE: The sound from this unit is muted during telephone calls.

Note:

•If connecting a hands-free kit, make sure the setting is ON to receive telephone audio through the system.

AUX function

An external input jack (AUX) is provided on the front panel to allow playback of sound and music from external devices.

●Selecting AUX IN sensitivity

Make the following settings to adjust sensitivity when the sound from an external device is difficult to hear even after adjusting the volume.

∗The factory default setting is “MID”.

1.Press and hold the [DISP] button (1 sec.).

2.Select “AUX SENS”.

3.Turn the [ROTARY] knob to select “HIGH”, “MID” or “LOW”.

Note:

•When AUX mode is selected, AUX IN sensitivity can be set.

7. ACCESSORIES

USB Operations

USB memory device operation

Note:

•The following operations are the same as CD mode:

∗Titles up to 64 bytes can be displayed in USB mode.

∗Pause

∗Track selection

∗Fast-forward/fast-reverse

∗Scan play

∗Repeat play

∗Random play

∗Folder selection

See “CD/MP3/WMA Operations” (page 11-13) for details.

About USB memory

•USB stands for Universal Serial Bus, and refers to an external bus standard supporting data transfer rates of 12 Mbps.

•This unit is compatible with USB 1.1/2.0 with maximum data transfer rates of 12 Mbps.

•USB memory devices playable via the unit’s USB cable are limited to those recognized as “USB mass storage class devices”; operation is not guaranteed with all USB memory devices.

∗Devices compatible with “USB Mass Storage Class” can be used by connecting to the host device without special drivers or application software.

•Consult the manufacturer of your USB memory device for information regarding whether it is supported by “USB Mass Storage Class” standards.

•Audio files playable on this unit are limited to MP3/WMA files. For details, see “MP3/WMA” (page 11).

Copy-protected WMA files cannot be played on this unit.

•To prevent accidental loss of data, always back up important data on your computer.

•Connections to a computer, or through a USB hub device are not supported.

English

CZ209 15