iPod Operations
This section describes operations when connected to an Apple iPod via the USB cable.
Notes:
•See the iPod Owner’s Manual for details regarding operations.
•The unit will not operate, or may operate improperly with unsupported versions.
•For a list of Apple iPod models compatible with this unit, please contact your Clarion dealer or www.clarion.com.
•Made for iPod means that an electronic accessory has been designed to connect specifically to iPod and has been certified by the developer to meet Apple performance standards.
Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
iPod and iTunes are trademarks of Apple Inc., registered in the U.S. and other countries.
Connecting an iPod
When an iPod is connected to the USB cable, the “Shuffle” setting on the iPod will become as follows:
•“Shuffle (Albums)” play ➜ Random play
•“Shuffle (Songs)” play ➜ All random play
The iPod has two modes: the “Play mode” and the “iPod menu mode” for selecting tracks. Switch between these modes by pressing the [BND] button.
Note:
•To connect an iPod, please use the USB cable that came with your iPod.
Select iPod mode
1. Press the [SRC] button.
Playback will begin from the last file that was played on the iPod.
Notes:
•The following operations in Play mode operate the same as in CD mode:
∗Track selection: [x], [v]
∗
∗Pause: [ 
]
See “CD/MP3/WMA Operations” (page
•After a Podcast file has completed playback, the pause display, or the
•If the iPhone is used for telephone call in the other operation mode and you wish to switch to the iPod mode, you must finish the telephone call and press the [ 
] button to enter the iPod mode.
Setting iPod simple mode
Use this function if you wish to operate through your iPod connected to this unit via the USB cable.
∗The factory default setting is “OFF”.
1.Press and hold the [DISP] button (1 sec.).
2.Press [x] or [v] to select
3.Press the [ 
] button.
4.Turn the [ROTARY] knob to select “ON” or “OFF”.
•ON: Operations can be made through your iPod.
•OFF: Operations cannot be made through your iPod.
5.Press and hold the [ 
] button (1 sec.) to store the setting and return to the previous mode.
Notes:
•When performing iPod operations using simple control mode, make the operations slowly. If repetitive operations are performed too quickly, unforseen errors may occur.
•Some iPod models do not support this function. Consult your nearest Clarion dealer or website to confirm which models do not support this function.
English
CZ209 17