Panasonic DMR-E75V Manual Dubbing VHS l DVD, To pause or stop Manual Dubbing, About TP channel

Advanced Operations DVD VHS

∫Manual Dubbing (VHS l DVD)

[RAM] [DVD-R]

You can specify the position to start dubbing the programme recorded on the tape to the disc.

≥The available discs for dubbing from the tape are DVD-RAM and non-finalized DVD-R.

≥Copy-guarded video tapes cannot be dubbed. Most of commercially sold/purchased video tapes are copy-guarded to prevent illegal reproduction and they cannot be recorded with the following procedure.

Preparation

VHS (Recording source)

≥Insert the video cassette containing the programme to be copied. (l 50)

DVD (Recording target)

≥Release protection. (disc l 28, cartridge l 15) [RAM]

≥Insert a disc and confirm there is sufficient empty space for recording on it. (l 17, 49)

Settings (“TV System” l 45)

≥When dubbing an NTSC tape to the DVD

-Set “TV System” on “Connection” in “SETUP” to “NTSC”. ≥When dubbing a PAL/MESECAM tape to the DVD

-Set “TV System” on “Connection” in “SETUP” to “PAL”.

[1]Press [VHS] and press [1, PLAY].

[2]Press [AUDIO] select the audio to be played (the audio to be recorded) beforehand.

[3]Press [;, PAUSE] at the start point of the recording.

[4]Press [DVD].

[5]Select “TP” channel with [CH, W, X].

≥The picture of the VHS is displayed on the TV.

≥When the “DC” channel is selected on VHS, you cannot select the “TP” channel.

[6]Press [REC MODE] to select the recording mode.

[7]Press [¥, DVD REC].

≥Disc recording and VHS play start at the same time.

To pause or stop Manual Dubbing

You cannot stop or pause on DVD and VHS at the same time.

∫To pause or stop recording

Press [DVD] and press [;, PAUSE] or [∫, STOP].

∫To pause or stop play

Press [VHS] and press [;, PAUSE] or [∫, STOP].

∫When dubbing is started, the following operations also

start automatically

≥“OSD” on VHS FUNCTIONS ) “OFF” (l 56)

Note

≥When “DVD / VHS Output” is set to “Manual” (l 43), or when VHS output is selected in starting dubbing, the output is switched to DVD automatically at the time when dubbing is started.

≥When a Copy-guarded tape is inserted, the message appears on the display and the recording stops on the spot.

≥Switching the audio mode by pressing [AUDIO]. The audio which you are hearing is recorded.

∫About TP channel

(TP: Dubbing input channel)

When you select TP channel, DVD can receive the video/audio signal from VHS. This enables you to dub the video played back on VHS to DVD.

≥Press [DVD] and press [CH, W, X] several times to select TP channel.

≥You can play back a tape in high picture quality (e.g. Progressive, RGB Output) with TP channel. (l 52)

≥Contrary to TP channel, DC channel is the channel for VHS to receive the video/audio signal from DVD. (l 61)

≥When the “DC” channel is selected on VHS, you cannot select the “TP” channel.

59