Panasonic Explore Advanced Operations in the DMR-E75V Manual

Advanced Operations VHS

QUICK ERASE

You can delete a cassette contents all at once.

Preparation

≥Press [VHS].

≥Insert a recorded video cassette.

[1]Insert a cassette that you want to delete the cassette contents.

[2]While stopped,

Press [FUNCTIONS] to display the VHS FUNCTIONS on the screen.

[3]Press [3, 4] to select the “QUICK ERASE”, and then press the [ENTER].

VHS FUNCTIONS

Timer recording
QUICK ERASE
Tape length	: AUTO ( E - 240)
PB Colour system	: AUTO
SQPB	: AUTO
OSD	: 4 : 3

: select ENTER : access

RETURN : return

[4]Press [ENTER] for 5 seconds or more to start

the QUICK ERASE function.

≥QUICK ERASE

function takes	ENTER : press for 5 seconds
approximately	STOP : cancel
30 minutes.
(with E-180 cassette)

∫To stop partway

Press [∫, STOP].

The tape is rewound to the beginning, and it is fast-forwarded with the quick erase function.

When the tape reaches the end, the VHS automatically rewinds it to the beginning.

Note

≥When a video cassette with a broken off erasure prevention tab is inserted, this function is not activated.

Changing audio

Press [AUDIO] to select the audio type.

The audio changes as follows:

L R (Stereo) > L – > – R > – – (Normal audio track) > L R (Stereo)

Note

≥You cannot change the audio while you use “DC” channel (l 61).

Various indications in on-screen display

To see these displays, set the “OSD” item in the “VHS FUNCTIONS” to “4:3” or “WIDE” (l 56).

Press [STATUS].

The following screen appears.

1 2	3	4 5
1 ARD M1/M2		L R SP
VHS
		0:00.22	6

1	VHS Indication
2	Input channel
3	Audio type
	Show the selected audio type
4	L and R indicators
	The Left (L) and Right (R) indicators show which sound mode
	is selected as follows:
	L R (Stereo): Both the L and R indicators appear.
	L –:	The L indicator appears.
	– R:	The R indicator appears.
	– – (Normal): Neither the L nor R indicator appears.
5	Tape speed or rec mode
6	Tape running display
	Pressing [STATUS] once makes the on-screen display
	appears. After that, press the button repeatedly to change
	the display as follows:
	Current time>Operation status and Tape
	counter>Remaining tape time>Current time
	during Index search: “01” to “20” is displayed.
	during Jet Rewind: “6 JET REW” is displayed.
	≥Press [¢, CANCEL/RESET] to reset the tape counter
	(elapsed time) to “0:00.00”.
	The tape counter is automatically reset to “0:00.00” when
	inserting a video cassette.
	≥The remaining time is approximate. It will be incorrect if you
	set the wrong tape time in the “Tape length” item in the
	“VHS FUNCTIONS” menu and if the tape is of poor quality.

Note

≥These displays do not appear during special playback.

≥The on-screen display may be distorted depending on the playback tape or the input signal.

57