Panasonic SL-SX280, SL-SX240 Other Play Methods, Anti-Skip System, Program play

SL-SX280

Other Play Methods

The letters such as A in the illustrations refer to the descriptions in the “Location of Controls” section. (See page 2.)

Skip play Repeat play/Random play Changing the sound quality

The disc plays from the specified track through to the end, then play stops automatically.

Preparation: Put unit in stop mode.

1 Select the desired track.

G

Press [MODE] while disc is playing or Press during play or stop mode.

when unit is in stop mode.	Main unit						L
							A
							L
							C
						/R	E
				R	Y		VOL
	D		M	O
		M
E		E
MODE							VOL
							EQ

	O
	P
	R
2	O
	F
			F
	F
	O
	P
	R
	O
		F
			F

Program play

Up to 24 tracks can be entered in the programmed se- quence.

Preparation: Put unit in stop mode.

1 Select the desired track.

G

		O
		P
		R
			O
2				F
						F
	Register in sequence.
	(The indication “M” and the programmed se-
	quence appear on the display.)
							L
							L
							A
							C
						/R	E
				R	Y		VOL
	B		M	O
		M
		E
							VOL
							EQ

3 Repeat steps 1 and 2 to program all the desired tracks.

4

F

The setting is switched in the sequence indicated below each time [MODE] is pressed.

1-track repeat (1 `)( ----------------	]
One track is repeated.
v
All-track repeat (`)

All the tracks on the disc are repeated.

v

Random (RANDOM)

The tracks play once each in random

order and then play stops.

v

Random repeat (RANDOM, `)

The tracks play repeatedly in random
order.
v
Cancel (no indicator is shown) --------------	}

When pressed during program play

The setting is switched in the sequence indicated below each time [MODE] is pressed.

1-track repeat (1 `M)(------------	]
One track is repeated.
v
Memory repeat (`M)

The programmed tracks are repeated.

v
Cancel (M) -------------------------------------------	}

Note!

≥You can select the first track to play in random play and random repeat play by pressing [9] while the disc is stopped. All the tracks are played.

≥You cannot select random play or random repeat play during program play.

≥The mode is canceled when you disconnect the power source.

Remote control SL-SX280

EQ

(Beep)

The setting switches in the sequence indicated below each time [EQ] is pressed.

S-XBS>TRAIN>Cancel (no indicator is shown)

^==========b

S-XBS:

Select this setting to boost the low frequency range re- sponse.

TRAIN:

Select this setting to avoid annoying other passengers with noise from your earphones while riding on the train, or to reduce fatigue when listening for a long period of time.

Note!

The setting returns to S-XBS when you disconnect the power source.

O
P
R
O
F
	F

∫To program the same track in the se- quence more than once

∫After step 2, press [MEMORY/RECALL] the desired number of times.

∫If “'” is displayed

∫No more tracks can be programmed.

∫To confirm the contents of the program

∫Press [MEMORY/RECALL] while the disc is playing. (The number of the programmed tracks appear on the display in sequence.)

∫To delete the entire programmed se- quence

∫Press [∫,OPR OFF].

Note!

The repeat and random play modes are canceled after steps 1 and 2.

Anti-Skip System

This system deals with skipping in a variety of ways:

≥An anti-skip mechanism prevents skipping caused when play speed changes due to swinging of the unit.

≥A recovery system immediately returns the laser pick- up to its original position if it is knocked off the track by a strong shock.

≥The anti-skip memory ( 40 seconds, SL-SX24010 seconds) fills in interruptions caused by bumps and vibrations.

The anti-skip system works automatically while the unit is on and cannot be canceled.

When bumps continue repeatedly

The message “SORRY” appears on the display and sound is interrupted.

VOL

A

C S-XBSTRAIN

ALL1 M

RANDOM

SORRY

Note!

The anti-skip memory compresses digital signals.

4 RQT5792