Dynamic Range Control (DRC) - DAB
The DRC facility can make quieter sounds easier to hear when your radio is used in a noisy environment.
There are three levels of compression:
DRC 0 No compression applied. (default) DRC 1/2 Medium compression applied. DRC 1 Maximum compression applied.
1.Press the On / Standby button to switch on your clock radio.
2.Press and release the Mode button until the DAB band is selected.
3.Press and release the Menu button. 'MANUAL' will show on the display.
4.Press the Tuning Up or Down buttons until 'DRC VAL' appears on the display. Press and release the Select button. The display will show the current DRC value.
5.Press the Tuning Up or Down buttons to select the required DRC setting (default is 0).
6.Press and release the Select button to confirm the setting.After several seconds the display will return to the normal radio display.
Note: Not all DAB broadcasts are able to use the DRC function. If the broadcast does not support DRC, then the DRC setting in the radio will have no effect.
2
3
4,5
4,5
4,6
11