Roberts Radio DreamTime2 manual To return to auto clock set mode

Page 26

To return to auto clock set mode

1.Press the On / Standby button to switch on the clock radio. If necessary press and release the Mode button to put the radio into DAB mode.

2.Press and release the Menu button to enter the setup menu. 'MANUAL' will appear on the display.

3.Press the Tuning Up or Down buttons until 'CLOCK' appears on the display. Press and release the Select button.

4.Press the Tuning Up or Down buttons until 'AUTO CLK' appears on the display. Press and release the Select button.

5.The radio will immediately set its time according to the information received with the DAB broadcast. The radio will return to normal radio operation with the time currently displayed.

Note: If you select 'AUTO CLK' the current time received will be displayed. If no DAB signal is found, 'NO CLOCK' will be displayed. You should then either position the clock radio or its aerial so that a signal can be received, or revert to manual clock mode (see page 23).

2

3,4

3,4

3,4

25

Image 26
Contents Enjoy Listening Contents Controls Top Controls rear Using the clock radio for the first time Operating your clock radio Press the On / Standby button to switch on your clock radio Selecting a station DABSecondary services DAB Display options DABSignal error Finding new stations DAB Manual tuning DAB Signal strength display DABDynamic Range Control DRC DAB Operating your radio FM auto-tune Manual tuning FM Display options FM Presetting stations Recalling a preset station Setting alarm times Weekdays Cancelling alarms To view the alarm settings Snooze functionTo set the snooze time Sleep function Setting the clock manually 10-14 To return to auto clock set mode Software version Clock displayDisplay backlight dimmer Language function System reset USB socket for software upgrade Headphone socketSpecifications Circuit Features Frequency CoverageGuarantee