Roberts Radio DreamTime2 manual Clock display, Display backlight dimmer, Software version

Page 27

Clock display

1.When your clock radio is in standby mode the time and day will be displayed. The time is always shown using a 24 hour clock format.

Display backlight dimmer

The brightness of the display can be adjusted when the radio is in standby or when the unit is in use.

1.In order to adapt the intensity of the display to suit the ambient room lighting, press the Dimmer button on your clock radio to select the dimmer brightness from High-Mid-Low and an almost off 'night-time' setting.

Software version

The software display cannot be altered and is just for your reference. Ensure your clock radio is switched on.

1.Press and release the Menu button.

2.Press the Tuning Up or Down buttons until 'SW VER' appears on the display.

3.Press and release the Select button. The display shows the software information.

4.Press and release the Menu button to exit the software display.

If you need any further advice, please call our Technical Helpline on :-

1

1,4

2

23

020 8758 0338 (Mon-Fri)

26

Image 27
Contents Enjoy Listening Contents Controls Top Controls rear Using the clock radio for the first time Operating your clock radio Selecting a station DAB Press the On / Standby button to switch on your clock radioDisplay options DAB Secondary services DABSignal error Finding new stations DAB Signal strength display DAB Manual tuning DABDynamic Range Control DRC DAB Operating your radio FM auto-tune Manual tuning FM Display options FM Presetting stations Recalling a preset station Setting alarm times Weekdays Cancelling alarms Snooze function To view the alarm settingsTo set the snooze time Sleep function Setting the clock manually 10-14 To return to auto clock set mode Clock display Display backlight dimmerSoftware version Language function System reset Headphone socket USB socket for software upgradeFrequency Coverage Specifications Circuit FeaturesGuarantee