System reset
If your clock radio fails to operate correctly, or some digits on the display are missing or incomplete carry out the following procedure.
1.Press the On / Standby button to switch on the clock radio.
2.Press and release the Menu button.
3.Press the Tuning Up or Down buttons until 'FACTORY' appears on the display. Press and release the Select button so that the display shows 'RESET' and then press the Select button again.
4.Afull reset will be performed. The station list and presets will be erased. Alarms will be cancelled and snooze and sleep timer settings will be set to their default values. The display will show 'ROBERTS' and after a short time the current time and day will appear on the display.
5.See "Operating your clock radio" on page 5 for further details.
In case of malfunction due to electrostatic discharge, reset the product as above to resume normal operation. If you are not able to perform the reset operation as above, removal and reconnection of the power supply may be required.
If a problem persists our technical staff would be pleased to offer any assistance on operating the radio. Our technical helpline number is 020 8758 0338.
If you need any further advice, please call our Technical Helpline on :-
1
2
3
3
3
020 8758 0338 | 28 |