Roberts Radio CR9987 manual Setting the Clock Automatically, Remote Control

Setting the Clock Automatically

The clock time and day of week can be set automatically when recieving an RDS radio station that transmits clock time (CT). The CT information is transmitted once every minute. If the signal has sufficient signal strength the clock will set within one to two minutes.

1.Switch on the radio with the BAND button on the CD clock radio or the BAND button on the remote control.

2.Select an RDS station using the Tuning Up/Down buttons.

3."CT" will flash in the LCD display indicating that the radio is waiting for an RDS time signal. The "CT" indicator will stop flashing when the time is set.

Note:- If the clock does not set within three to four minutes, the radio station may not be transmitting clock time (CT) information, in this case try another radio station.

The clock time and day of week are updated every time the radio is switched on and whilst listening to an RDS station transmitting clock time (CT) information.

Auto setup can take up to 5 minutes to complete and is dependent on the signal strength and number of stations in your area.

Should Auto setup fail, setting the clock and pre-setting stations can be carried out manually as described in the following sections.

1

2

Remote Control

1

9