Operating your radio - manual tuning
1. Switch on your radio by pressing the BAND button on the CD clock | |
| radio or the BAND button on the remote control. |
2. | Select the required waveband by pressing the BAND button. The |
| waveband selected will appear in the display. On FM fully extend the |
| wire aerial from the rear of your clock radio. On MW rotate your radio |
| for best reception. |
3. | A single press on either the Tuning up or Tuning down buttons |
| will change the frequency up or down. |
| The frequency steps are:- FM 50kHz and MW 9kHz. |
2
1 | 3 | 3 |
4. | Adjust the VOLUME control to the required level. |
5. The tone of your radio can be altered by adjusting the Tone control | |
| on the right hand side of the unit. |
6. | Press the StandBy button to switch off your radio. |
2
6
Remote Control
6
2
4
45
17