Roberts Radio CR9987 manual Operating your radio search tuning, Remote Control

Page 17

Operating your radio - search tuning

1.Switch on your clock radio by pressing the BAND button on the CD clock radio or the BAND button on the remote control.

2.Select the required waveband by pressing the BAND button on the CD clock radio or the BAND button on the remote control.

The waveband selected will appear in the display. On FM fully extend the wire aerial from the rear of your clock radio. On MW rotate your radio for best reception.

3.Press and hold down either the Tuning up or Tuning down buttons until the frequency in the display begins to change rapidly. Release the button.

4.Your radio will scan the selected waveband, stopping each time it finds a station of sufficient strength. Adjust the VOLUME control to the required setting.

5.To search for additional stations repeat the above procedure. Search tuning may be stopped by a single press on either the Tuning up or Tuning down buttons.

6.The tone of your radio can be altered by adjusting the Tone control on the right hand side of the unit.

7.Press the StandBy button to switch off your radio.

If you need any further advice, please call our Technical Helpline on :-

2

5

5

1

3

3

7

Remote Control

4

 

7

5

5

1

2

3

3

4

 

6

020 8758 0338 (Mon-Fri)

16

 

Image 17
Contents CR9987 Contents Controls Top Controls Left Side Right Side Controls Front Remote Control Controls Display Mains Operation Battery operationImportant Information please read before use Night light Display backlightAutomatic Plug and Play setup Setting the Clock Automatically Ensure that the radio is switched off press StandBy Setting the clock/day of week manuallySetting the alarms to wake to buzzer Setting the alarm timesSetting the alarms to wake to radio Setting the alarms to wake to CD Weekend alarm cancel Displaying the alarm time and alarm modeSnooze control Sleep timerOperating your radio search tuning Select the required waveband by pressing the Band button. Operating your radio manual tuningFlash in the display Pre-setting stationsLast station memory Recalling a preset stationClock Time CT automatic adjustment Programme Service PS nameRadio Data System RDS Programme Identification PI Enhanced Other Network EONDisplay Modes Operating your radio using RDS Radio data systemTraffic Announcements TA CD-R/CD-RWdiscs Compact discsInserting a CD Playing a CD Search function Selecting a trackCD random play CD repeat modeCD Intro play Prog/Random button Programmed playChecking and Editing a programme Erasing a programme Remote Control HeadphonesGeneral Back-up Battery not necessary for the unit to functionMains supply FusePower Requirements Specifications Circuit FeaturesPage Guarantee Roberts Radio Technical Services