Roberts Radio CR9987 manual Setting the alarm times, Setting the alarms to wake to buzzer

Page 12

Setting the alarm times

The alarms can be set to wake you by a buzzer, CD or the radio. Your CD clock radio has 2 separate alarms which can be set to activate at different times.

Setting the alarms to wake to buzzer

1.Ensure that the radio is switched off (press StandBy).

2.Press and hold down the Alarm 1 or Alarm 2 button until the hour digit flashes.

3.Press the Tuning Up/Down buttons to set the correct hour.

4.Press the applicable Alarm button (1 or 2) to confirm. The minute digit now flashes.

5.Press the Tuning Up/Down buttons to set the correct minutes.

6.Press the applicable Alarm button (1 or 2) to confirm.

7.Press the Tuning Up/Down buttons to select BUZZ.

8.Press the applicable Alarm button (1 or 2) to confirm.

9.Press the Tuning Up/Down buttons to select alarm volume - H (High), L (Low) or M (Medium).

10.Press the applicable Alarm button (1 or 2) to confirm.

11.At the preselected time the buzzer will switch on. The buzzer will switch off automatically after 90 minutes. The buzzer alarm may be switched off for 24 hours by pressing the StandBy button.

12.To permanently cancel the buzzer alarm set the alarm time as described, then select OFF using the Tuning Up/Down buttons.

1

3

5

7

9

11

2

2

4

4

6

8

7

10

1210

11

Image 12
Contents CR9987 Contents Controls Top Controls Left Side Right Side Controls Front Remote Control Controls Display Battery operation Important Information please read before useMains Operation Display backlight Night lightAutomatic Plug and Play setup Setting the Clock Automatically Setting the clock/day of week manually Ensure that the radio is switched off press StandBySetting the alarm times Setting the alarms to wake to buzzerSetting the alarms to wake to radio Setting the alarms to wake to CD Displaying the alarm time and alarm mode Weekend alarm cancelSleep timer Snooze controlOperating your radio search tuning Operating your radio manual tuning Select the required waveband by pressing the Band button.Pre-setting stations Flash in the displayRecalling a preset station Last station memoryProgramme Service PS name Clock Time CT automatic adjustmentRadio Data System RDS Programme Identification PI Enhanced Other Network EONOperating your radio using RDS Radio data system Display ModesTraffic Announcements TA Compact discs CD-R/CD-RWdiscsInserting a CD Playing a CD Selecting a track Search functionCD repeat mode CD Intro playCD random play Programmed play Prog/Random buttonChecking and Editing a programme Remote Control Headphones Erasing a programmeBack-up Battery not necessary for the unit to function GeneralMains supply FuseSpecifications Circuit Features Power RequirementsPage Guarantee Roberts Radio Technical Services