Roberts Radio R9968 manual Setting the alarm to buzzer

Page 13

Setting the alarm to buzzer

1.Set the alarm time as previously described.

2.Press the Alarm button. The Alarm icon will flash in the display for a few seconds before returning to the clock display.

3.While the Alarm icon is flashing, press the Alarm button

again to select the buzzer alarm mode. The Buzzer icon will appear and flash in the display.

4.Press the Alarm Set button to confirm the alarm.

5.The bottom display will stop flashing, the Alarm icon and the

Buzzer icon will remain on the display.

6.The buzzer alarm will sound at the preset time. It will increase in volume, tone and frequency, over the period of one minute, and then fall silent for one minute. This cycle will be repeated for 60 minutes.

7.To switch off the alarm until the next day, press the On/Off Sleep button.

8.To switch the alarm off permanently, press the Alarm button. The

Alarm icon will flash in the display for a few seconds before reverting to the clock display.

2

3

4

2

2

If you need any further advice, please call our Technical Helpline on :-

020 8758 0338 (Mon-Fri)

13

Image 13

Contents R9968 Contents Overview Controls Front Controls Right side Left side Bottom Controls TopControls Back Batteries Disabling the buttons Switching on and setting the time zoneSetting summer time Setting the local timeShort wave radio reception Switching between local time and GMTListening to the radio Setting the alarm time Setting the alarm to buzzer 911 Setting the alarm to radioSnooze control Checking the alarm timeBacklight Sleep timerHeadphones ResetStereo/Mono reception headphone use only Power Requirements Circuit Features SpecificationsGuarantee Roberts Radio Technical Services