Disabling the buttons
The Lock button is used to prevent unintentional operation of your receiver.
1. Press the Lock button to disable the buttons on the receiver. The | 1 | |
Key icon | will be shown in the top display panel. This will prevent |
|
accidental operation when your receiver is packed in a suitcase or travel bag.
This does not affect the Volume control, the Stereo/Mono switch or the Waveband switch.
2. To enable the receiver buttons, press the Lock button again, this will
cause the Key icon 
to be extinguished from the top display panel.
Switching on and setting the time zone
1
1.Place the unit on a flat surface. Make sure that the batteries have been inserted correctly, or if using mains power, plug the mains lead into a wall socket and switch on at the wall socket. The unit will beep twice.
2.The display will flash the Home icon 
and the number of the current time zone.
3.Rotate the Zone control to select the city in your time zone. This will change the time zone code displayed on the top screen. The time zone codes are displayed with a world map on the rear of the unit.
4.Press the H.T.Z. button to confirm the time zone.
5.The display on the top screen will show the World icon 
.
3
4
8